directv channel satellite transponder list

Your remote isn’t operating the receiver. Problem: You are unable to move from one channel to another. Recheck the transponders (see above bullets) To the left of the access card is the reset button, press and hold for 15 seconds On the right hand side of the receiver, there is a door that needs to flipped opened You can press the red reset button for 15 seconds You can unplug from the back of the receiver. Unplug the receiver’s power for 15 seconds. If transponders are in the 80’s and 90’s, then have the customer reset their receiver If the transponders in 99(c), 103(ca), 103(cb) are low, it usually is a dish or equipment issue If you are having issues with their HD locals and set up is correct then it could be problem with the dish Press Select on + to change between tunersįor HD and HD DVR receivers, you will see 101, 110, 119, 99(c), 103(ca), 103(cb), and SWM On the DVR’s, make sure they are getting a signal on both tuners Make sure the first 3 transponders are above 80 You will not see all transponders, they will either show 0 or – To see the different satellite transponders, press the Select on + for Satelliteįor standard and DVR receivers, you will only get the 101, 110, and 119 satellites If it is raining, snowing, or heavy winds the numbers will be in the 40’s and 50’s If you see numbers, a reset should fix it Press arrow down to Satellite or Satellite & Antenna Press arrow down to Parental Fav’s & Setup On the receivers that are not working, check the transponders. Find out what type of receivers are not working?

Directv channel satellite transponder list